Sargent and Greenleaf 6123 Guía para resolver problemas descargar pdf

This troubleshooting guide is designed to help you identify and solve problems you may encounter with

a Sargent & Greenleaf electronic lock. It is not designed as a substitute for the instructions that were

shipped with your lock. If the instructions are missing, you can obtain a replacement by contacting S&G

at the Nicholasville address listed at the bottom of the page. As an alternative, you can call us at (859)

885-9411. An automated literature extension will record your request and mailing information. An auto-

mated lock help line is also available 24 hours a day, 7 days a week. The number is (800) 826-7652,

extension 500. You must call from a touch tone phone. Troubleshooting information is also available on

S&G’s internet site. The address is

www.sargentandgreenleaf.com

Some of the following troubleshooting procedures are intended for the consumer, and others require the

skills of a qualified safe technician. The Sargent & Greenleaf line of electronic combination locks is not

designed to be user serviceable. We specifically do not recommend any repairs beyond replacing either

the keypad or the lock body as a unit.

All applicable troubleshooting procedures should be tried before a safe is forcibly opened. Whenever a

safe must be opened by drilling, S&G recommends you contact the safe manufacturer first. The safe

maker will supply appropriate procedures for dealing with his product.

If you find it necessary to locate a competent safe technician in your area, S&G suggests you call the Safe

& Vault Technicians Association, at (214) 827-7233. Any work which you think may be submitted to S&G

as a warranty claim must be cleared by our Technical Services Department prior to completion.

Sargent & Greenleaf, Inc.

One Security Drive, Nicholasville, Kentucky 40356

Phone (859) 885-9411 FAX (859) 887-2057

This document is part number 630-325

Revision 4/1/04

Troubleshooting

Guide

Model 6120, 6123

Motorized Electronic

Combination Locks

Basic Operation:

The Sargent & Greenleaf line of electronic locks is powered by alkaline batteries which are

located under or within the keypad housing. They can be easily replaced by following the

instructions that originally came with the lock.

The lock can be ordered in two basic lock bolt configurations—a traditional square bolt for

use with most safe designs, and a beveled spring bolt for direct locking applications on

light safe doors and inner compartments of burglary safes.

When the correct code is entered and followed by the

sign, a motor retracts the lock

bolt. This allows the container to be opened. The bolt remains retracted for six seconds;

then the motor extends the bolt again. S&G electronic locks are equipped with a spring

mechanism to automatically extend the bolt after any obstruction, such as safe boltwork,

is moved out of its path.

Some safe manufacturers ship safes with the lock bolt retracted. With the door open and

the safe handle turned fully to the locked position, enter the code (followed by the

sign).

Wait fifteen seconds, then repeat the procedure. The lock should now cycle normally.

Close your safe door only after checking for proper lock operation at least three times.

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - Troubleshooting

This troubleshooting guide is designed to help you identify and solve problems you may encounter with a Sargent & Greenleaf electr

Pagina 2 - POSSIBLE SOLUTION(S)

PROBLEMS1) Lock beeps and LED flashes on key press, but does not open with a six digit code2) Lock opens but doesnʼt beep or light when a key is press

Pagina 3

PROBLEMS7) Lock opens intermittently when using valid codes8) Lock beeps three times when code is entered, but doesnʼt open9) Unable to delete time de

Pagina 4

Test Procedures1. Lockout Mode Test ProcedureThe S&G electronic locks have a wrong code lockout feature that prevents the lock from operating wro

Pagina 5

4. Walk Back Procedure (cont.): D) See if the safe handle can be turned to the unlocked position. If not, move the handle back to the fully lock p

Pagina 6

8. Keypad Connector Check:If the lock works intermittently, check for loose wires at the keypad connector (underside of the2-battery keypad). It is a

Comentarios a estos manuales

Sin comentarios

Sargent and Greenleaf 6123 Guía para resolver problemas

Busca en linea o descarga Guía para resolver problemas para Lectores de control de acceso Sargent and Greenleaf 6123. Sargent and Greenleaf 6123 Troubleshooting guide Manual de usuario

Indice de contenidos

Comentarios a estos manuales